Hansgrohe Tango C 04270 0 Serie Instructions De Montage / Mode D'emploi / Garantie page 6

4
1
5
6
6
2
English
(1) Install the handle deco ring on the handle.
(2) Place the handle over the valve.
Fasten the handle to the valve by rotating the
bell and deco ring clockwise.
Install the drain pull rod.
Connect the hoses to the valves.
Use two wrenches. Do not
allow the hose to twist.
A twisted hose may become
loosened from the faucet,
causing a leak.
Install the ½" hot and cold supply lines (not
included).