Craftsman CMXPTSG1006NB Guide D'utilisation page 9

ENGLISH
4. Loosen the collet
Spindle Lock and placing the
6
wrench 9 on the flats of the collet and
turning it counterclockwise.
5. Insert a 1/4 in. shank accessory (not
included) into the collet . Tighten
the collet by depressing the Spindle
7
Lock and placing the wrench
6
on the flats of the collet and turning it
clockwise. Make sure the 1/4 in. shank
accessory is installed securely and
tightly.
WARNING: Only use accessories
that have an RPM rating equal to or
greater than the tool itself. Also
make sure any accessory is
compatible with the collet opening.
Before using tool, always make sure
attachments are properly
mounted/secured. If attachments
are not properly mounted/secured,
they can present a serious hazard
and may cause bodily injury for the
operator or anyone in or around the
work area. Always follow the
attachment manufacturer's
specifications for properly attaching
accessories to tool.
8
7 by depressing the
7
9
2
6
7
2
6
7
9
PUSH
9
PUSH