littlehippo Mella Mode D'emploi page 6

SETUP AND MAINTENANCE
All manuals and user guides at all-guides.com
Fig. 2 AC Adapter
Fig. 3 Battery
Compartment
USER TIP
When MELLA is not plugged into an outlet, the included CR2032 battery
preserves basic memory functions.
SET UP
Attach the AC adapter jack to the MELLA's base and
insert the cord into a 100V-240V household outlet
(Fig. 2).
STORE
MELLA should be left on display, or stored in its box
or a cool, dry place.
CLEAN
Wipe off dust with a soft, damp cloth. Do not use
liquids or abrasive cleaners.
INSTALL BATTERY
MELLA comes with a pre-installed CR2032 battery.
Pull the clear tab to remove the insulation sticker.
Removing the insulation sticker will allow MELLA's
memory settings to be saved.
REPLACE BATTERY
Eject the battery cartridge by inserting the included
battery pin into the hole (Fig. 3). Insert the battery
positive side up and fully slide the cartridge back
into the compartment.
5