Publicité
Step 11
Fasten an EXTENSION RAIL (1) to the LARGE SPACER (M). Use
å
three 3/8" PAN HEAD SCREWS (15).
NOTE: Turn a SCREW into the hole shown in the enlarged
å
diagram. Then, slide the inner cartridge of the EXTENSION
RAIL in to fi nd the other holes that lines up with the holes in the
LARGE SPACER. Turn a SCREW into these holes.
Open end
Open end
Page 16
Use these holes
3/8" PAN HEAD SCREW
(3 used in this step)
1
M
C
www.sauder.com/service
15
429256
Publicité
