Publicité
Connecting The DWL-P50
P+DATA IN:connect a CAT
5 RJ-45 straight- through
cable from PoE switch.
LAN OUT:connect a CAT
5 RJ-45 straight- through
cable to an Ethernet
enabled device.
Use the Voltage Selector to set the DC output to 5V(11.5W) or 12V(12W)
depending upon your Network device's power specifications.
All manuals and user guides at all-guides.com
2
Voltage Selector:used to
select DC 5V (11.5W) or
12V (12W)
DC OUT:supplies 5V or
12V of power. Using the
included power cable,
connect to your Ethernet
enabled device's power.
Publicité
