Beper 90.115H Manuel D'instructions page 11

Electronic kitchen scale Use instructions Electronic kitchen scale Use instructions
WARNING INDICATORS WARNING INDICATORS
Overload Overload
When load exceeds 2kg, display will appear "EE". When load exceeds 2kg, display will appear "EE".
Low-Voltage Low-Voltage
When batteries are low, the scale will display "LO". Replace the batteries. When batteries are low, the scale will display "LO". Replace the batteries.
POWER POWER
1. Remove the scale from the packing. 1. Remove the scale from the packing.
2. Open the battery case. 2. Open the battery case.
3. Insert battery type AA (1.5V) paying attention to polarity. 3. Insert battery type AA (1.5V) paying attention to polarity.
4. Close the battery case. 4. Close the battery case.
ATTENTION
ATTENTION
Low battery become dangerous for the possible loss of very corrosive liquid. To avoid any damage, Low battery become dangerous for the possible loss of very corrosive liquid. To avoid any damage,
replace the battery as soon as necessary.
If the scale is not used for a long period, it is recommended to remove battery from the case, in order
to avoid damages with the corrosive liquid into the scale.
EVERY DAMAGES CAUSED BY BATTERY LIQUID WILL VOID THE WARRANTY.
TO INSTALL AND REMPLACE BATTERY
When the scale does not turn on anymore or the LCD shows "LO" or if does not work correctly, that
means that the battery is low. Replace it with new one.
Open the battery case and insert battery new battery respecting polarity.
A bad use can cause damages to the scale.
Close the battery case.
The used battery have to be recycled. Do not throw into fi re or environment.
CLEANING
Clean the scale with a slightly damp cloth.
Do never clean with thinners, abrasive substances that could damage the surface of the scale.
Do not immerse the scale into water. Protect the device from liquids.
Keep the scale away from hair detergent, cosmetics or bath detergents that could damage the scale.
All manuals and user guides at all-guides.com
11
EN