Rowenta AIR FORCE EXTREME RH8857 Mode D'emploi page 15

• To attempt the repair of an electronic appliance at home may be hazardous to the user.
• Only use original, guaranteed Rowenta replacement parts (filters, batteries...).
• This appliance is intended for domestic use only. In case it is used inappropriately, not following
the given instructions, Rowenta will not be subject to any liabilities whatsoever.
• The vacuuming tube located at the height of the vacuum head must be checked regularly. If it is
damaged, the appliance should not be used.
2 • Electric power source
• Make sure that the voltage indicated on the rating plate of the charger corresponds to that of your
power source.
• Never unplug the charger by pulling the electric cord.
• If the charger cord is damaged or if the charger itself does not function properly, do not use any
other charger, different from the model provided by the manufacturer, and contact the Rowenta
Consummer Service or go to the authorized Service Center nearest to your home.
3 • Repairs
Repairs must only be carried out by specialists using original replacement parts. To attempt the repair
of an electronic appliance at home may be hazardous to the user, and will invalidate the guarantee.
DESCRIPTION
1. Ergonomic handle
2. Stop/Start button
2.a Stop position
3. Light speed signals
3.a « Minimum » position
3.b « Medium » position
3.c « Turbo » position
4. Light charge signals (mini, medium, max)
5. Neck
6. Main body
7. Locking screw
8. Air outlet grill
9. Dust tray
9.a Dust receiver (0,5L)
9.b Dust separator
9.c Foam rubber motor protection filter
9.d Lid
BEFORE FIRST USE
1 • How to assemble the Appliance
Unpack your appliance and throw away any tags attached. Make sure to keep your guarantee and
read the instructions carefully before using the appliance for the first time.
• Remove the screw from the neck and leave the nut in its place.
• Fix the neck by carefully inserting it in the upper portion of the main body (fig.1).
• Insert the locking screw (7) into the neck and screw it tightly using the tool provided with the
appliance (fig.2).
• Fix the Delta vacuum head (11) by locking it into place in the lower portion of the main body
(fig.3).
* May vary according to model
All manuals and user guides at all-guides.com
10. Connection tube
11. Delta vacuum head with integrated
electro-brush
11.a Electro-brush
11.b LED
11.c Latches
11.d Trap
12. Wheels
13. Charger
- 14.4V, 18,0V and 25.2V: ref. RS-RH5275*
14. Batteries
- 14.4V : ref. RS-RH5272*
- 18.0V : ref. RS-RH5273*
- 25.2V : ref. RS-RH5274*
15. Tool
EN
14