Remember that the end user is responsible for
accidents and damages caused to yourself, other
people and objects.
2. NORMATIVE AND SECURITY
MEASURES
Read all the warning signs and all the
instructions. The non observance of the warning and
instructions detailed from here on can result in a fire
being caused and/or a serious injury. Before using the
machine, read carefully the information in this manual
on a secure and correct start up. If you have any
doubts about the information in this manual, either
consult with a professional or go back to where you
purchased the machine and ask.
The following list of dangers and precautions include
the most probable causes whilst using the machine.
If you find yourself in a situation not explained in
this manual, use your common sense and use the
machine in the most secure way and if you see any
danger, do not use the machine.
2.1. USERS
This machine has been designed to be operated by
people over 18 and whom have read and understood
the instruction manual.
Attention! Do not allow underage people to use
the machine.
Attention! Do not allow people who do not
understand the instruction manual to use the
machine.
Before using the machine familiarize yourself with the
machine making sure you know perfectly well where
all the controls can be found as well as all security
devices and how all these should be used. If you are
not an expert user we recommend you start with some
simple jobs and if possible, under the supervision of
an expert user.
Attention! Only lend this machine to people who
are familiarized with this type of machine and know
how to use it. Always lend the instruction manual
with the machine so that the new user reads it and
understand it prior to carrying out any work.
This machine is dangerous in untrained hands.
2.2. PERSONAL SECURITY
Be alert and vigilant and use common sense when
using the machine.
Do not use the machine when you are tired or
under the influence of drugs, alcohol or medicines.
One moments distraction can cause serious personal
injury.
Attention! Hot water. Burning danger.. Should
the pressure switch of this pressure group not work
properly, it could be that the pump will not stop when
there is no water in the system. The pump would carry
on working heating the water in the system, reaching
very high temperatures that could cause burns and
cause injuries to any user that opens a tap after a few
minutes. Always check that the engine of the pump
stops when there is no water in the system.
Should you observe that the pump does not stop
when there is no water, stop the engine using the on/
off switch, disconnect the cable from the mains, wait
a few minutes until the water cools, and take the
machine to your after sales service.
19/92
English