Publicité
Les langues disponibles
Les langues disponibles
SMART SITE™ TIME CLOCK & DOCUMENT STAMP
Model 3550SS/3600SS
SET UP
1
Remove time clock from carton & place on a flat, level surface.
2
Unlock & remove top cover.
3
Connect power adaptor in port located behind display screen & plug unit
into AC wall outlet.
WALL MOUNTING
1
Select a location convenient to employees
clocking IN & OUT. Be sure power outlet is
within 5 feet of mounting location.
2
Use masking tape to hold mounting template on
wall, making certain template is positioned so
bottom of time clock is approximately 45 inches
from floor.
3
Drill holes using template as a guide.
4
Remove template from wall & install #10 screws
(not included), leaving approximately 3/16 inch
of screws exposed. For sheetrock walls, use
plastic anchors.
5
Hang time clock on wall, aligning keyholes on the
rear with screw heads. Press downward on time
clock until it lowers onto screws.
6
Plug unit into AC wall outlet.
PROGRAMMING
1
Use key to unlock and remove top/front
cover. Locate programming buttons la-
beled SELECT, s (UP) & t(DOWN).
Press SELECT until desired feature is
2
displayed (see chart on page 5).
3
Press s(UP) & t(DOWN) to scroll through
feature options.
4
Press SELECT to save option setting &
move to next feature.
4
GETTING STARTED & PROGRAMMING
All manuals and user guides at all-guides.com
888.479.7264
Publicité
