Rimax Baby BABY KANGOO Manuel D'instructions page 24

All manuals and user guides at all-guides.com
EN
User manual
Baby Kangoo RB202
Brightness menu
Use the browser to select the brightness of the image. Use UP "" DOWN "" to go from darker to lighter.
Press the OK button to accept the changes.
VOX menu
The menu lets you select VOX sensitivity to the sound of the camera. You have two options Hi Sensitivity
(high sensitivity) and Low Sensitivity (low sensitivity).
Press the LEFT "" and RIGHT "" to select the sound level, the receiver emitir'a an alert tone when the
sound in the cáamara is above the selected value
Temp. Menu Setting
This menu is used to select the range of temperature alert. Press the LEFT "" and RIGHT "" to select the
range of temperatures. When the camera detects the temperature is outside this range, the monitor will
sound an alert.
You can also select the unit to display the temperature in ºC or ºF.
Camera Pairing
The System comes with camera(s) that have already been paired. These cameras will communicate with the
receiver once powered on.
The Pairing Function assigns each Camera to a diff erent channel on the Wireless Receiver (up to 4 Cameras),
and is necessary for confi guring additional cameras.
NOTE: It is highly recommended to pair the Cameras to the Receiver before permanently mounting the
Cameras.
1. Power on the Camera by connecting the Power Adaptor or Battery Pack, and turning the switch to ON. The
power LED for the Camera should be ON.
2. Power on the Receiver by connecting the power adaptor to the 5V Input on the side.
3. Press the MENU button on the Receiver. Navigate to the PAIRING Menu option by pressing using the
"" keys to navigate. Press the OK button to open the Pairing Menu.
4. Select a channel 1-4 by pressing the UP and DOWN "" arrows. Press the OK Button on the receiver to
accept.
5. The screen displays a message receiver and the receiver will count
down from 30 to 0 - should press PAIR (Pair) at the back of the camera
during this countdown to properly match the camera.
If the button on the Camera is not pressed, the Receiver will return to the
view screen, and no pairing will take place.
24