Rimax Baby BABY KANGOO Manuel D'instructions page 22

User manual
2. CHANNEL INDICATOR - CH1: Displays the current channel number. Press the Right "" Button on the
Receiver to switch between available cameras.
NOTE: To automatically switch between channels, press the Left "" Button (AUTO).
Low Signal / No Signal Warnings
When the Camera is positioned too far from the Receiver, warning messages will be displayed:
OUT OF RANGE
LOW SIGNAL: The "Low Signal" signal
appears when the receiver has One or
Two bars. You will still get an image,
however updating may be less frequent.
Adjusting the Receiver Volume
The Receiver Volume can be adjusted using the UP andDOWN "" arrow buttons when viewing a
camera.
Press the DOWN "" Arrow to decrease the Volume, and press the UP "" Arrow to increase the volume.
When the volume is set to one bar (lowest setting), the volume is muted.
The Volume Adjustment icon will be displayed during Volume changes, and will disappear after 10 se-
conds of inactivity.
All manuals and user guides at all-guides.com
EN
22
Baby Kangoo RB202
NO SIGNAL
NO SIGNAL: The "No Signal" message
means the receiver cannot access the
camera. Please reposition the camera, or
check the Camera power.