All manuals and user guides at all-guides.com
5.
Start carefully at low speed by pressing and holding down the normal but-
ton (2), or alternatively, the turbo button (3) for maximum power.
6.
Alternatively, you can set the desired speed for the normal button manually
using the variable speed control (1).
7.
Move the appliance slowly up and down and in circles to blend the ingre-
dients.
Ensure that the container is not damaged when blending.
Do not operate the appliance unattended and check it for damage and proper
assembly before using it each time.
7. Cleaning and Care
Do not immerse the motor unit in water.
•
Disconnect the mains plug before cleaning.
•
Dismantle all the parts.
•
Wipe the motor unit with a damp cloth.
•
Clean the blender in warm water and some dishwashing liquid.
Note: The blade unit can also be cleaned while it is attached to the motor unit by
immersing the unit in warm water with some dishwashing liquid and running the
device for some time.
Ensure that the motor unit does not get wet and do not immerse it in water! Dry
the motor unit and store it for later use.
8. Safety instructions and disclaimer
Never try to open the appliance to carry out repairs or modifications. Avoid con-
tact with the mains voltage. Do not short-circuit the product. The appliance is not
approved for outdoor use. Therefore please use it only in dry surroundings. Protect
it from high humidity, water and snow. Do not expose the device to high tempera-
tures. Do not expose the device to sudden changes in temperature or strong vibra-
tions, as this could damage the electronic components. Check the device for any
damage before using it. The device should not be used if it was subject to impact or
has been damaged in some other manner. Please comply with the local regulations
and restrictions. Do not use the appliance for purposes other than those described
English
21