Appendix (English); Technical Specifications - Alto Professional TX308 Guide D'utilisation

Appendix (English)

Technical Specifications

Specifications are subject to change without notice.
TX308
System Type
Drivers
Amplifier
Horn Coverage
Frequency Response
Crossover Frequency
Max SPL
Connectors
Controls
Indicators
Power
Protection
Enclosure
Mounting/Installation
Dimensions
(height x width x depth)
Weight
2-way active ported loudspeaker
Low-Frequency: 8.0" (203 mm) driver, 1.4" (35.5 mm) voice coil
High-Frequency: 1.0" (25 mm) titanium-diaphragm compression driver,
1.0" (25 mm) voice coil
350 watts , 175 watts
(peak)
90º horizontal x 60º vertical
75 Hz – 20 kHz
(-3 dB)
2.5 kHz
113 dB @ 1 m
(1) XLR balanced input
(1) XLR output
(Link)
(1) IEC power cable input
Power switch, volume control knob
(2) power LEDs (1 front panel, 1 rear panel), clip limiter LED
Connection: IEC
Voltage: 100–240 V~; 50/60 Hz
Fuse: T2AL/250V
Consumption: 150 W
Thermal, overload analog limiter/compressor
Injection-molded polypropylene, multi-angle for main or monitor
applications, metal grille, rubber feet, 1 handle on top
Standard 36 mm pole socket, wedge monitor
16.6" x 10.7" x 9.9"
422 x 272 x 251 mm
12.3 lb
5.6 kg
, Class D power
(continuous)
(nominal)
(Line/Mic)
39