Toyota Blu Logic Guide De Référence page 7

Pairing Order Continued:
5. Select "BLU Logic XXXX" from the
list. Enter the pre-programmed passkey
"1234" and press "OK" to pair the kit and
the hand-set. When pairing is completed,
you may hear a long beep. Now the sys-
tem is in standby mode (for most mobile
hand-sets a headset icon will be shown on
the screen).
All manuals and user guides at all-guides.com
Pairing Guide

6. Press "Return" to go back to your hand-
set's main menu. You should, now be
able to make and receive calls through the
system within a distance of approximately
30 ft./10 meters (obstructions may cause
this distance to be shorter)
Pairing Note:
3
Some manufacturer's
not allow automatic connection to
Hands-free devices. If your hand-set
does not connect automatically, please
check to see if the auto-connect feature
has been enabled or set to Without
Confirmation. Other possible settings
may be: Required AuthorizationNO,
Device AuthorizedYES,
AuthorizedYES,
DeviceYES.
Please refer to your hand-set's user
manual for further details.
hand-sets do
Connection
or Trusted
7