Polaris 3900 Instructions D'installation page 3

Figure 9. Remove top housing
11. Set cleaner on its single side wheel. Insert a small
flathead screwdriver under the hubcap notch
to pry hubcaps from both double side wheels.
(Figure 10.)
Figure 10. Remove hubcaps from double side
wheels
12. Remove screws from center of each wheel
(Figure 11) and slide wheel off to remove (Figure
12).
NOTE: Wheel screws are smaller diameter than body
screws. Set these screws apart from other screws to
prevent mixing.
All manuals and user guides at all-guides.com
|
Polaris 3900 Tune Up Kit Installation Instructions
®
ENGLISH
Figure 11. Remove two (2) double side wheels
Figure 12. Double side wheels removed
13. Turn cleaner over and set on its double wheel side.
14. Remove the tire from the single side wheel (Figure
13). Pull the lip of tire back and peel off gradually.
Set aside to replace later.
Figure 13. Remove tire from single side wheel
Page 3