Publicité
INSTALLING INTO SOLID DOOR OR INTO
THICK UPPER SECTION OF PANEL DOOR:
STEP 1
Decide the placement of the wire frame to the
door and secure with (2) #8 x 5/8" flat head screws
making sure it is level (See Figure A).
Note: make sure that wire frame will not hit
adjacent door or cabinet stile when closing
before securing to door. Frame may need to be
installed closer to the inside of the door for
proper clearance.
STEP 2
Insert caddy onto the frame (See Figure B).
Note: caddy can also be installed with large
compartment facing front (turned 180°).
INSTALLING ON
5 PANEL DOOR:
STEP 1
Secure one side of the wire frame to the bar with
provided machine screw (See Figure C).
Note: frame will need to be installed closer to
the hinge side of the door. Right hand door
install shown. For left hand, rotate bar and
install to left side of frame.
STEP 2
Decide the placement the wire frame to the door
and secure with (2) #8 x 5/8" flat head screws
making sure it is level (See Figure D).
Note: make sure that wire/bar will not hit
adjacent door or cabinet stile when closing
before securing to door. Frame may need to
be installed closer to the inside of the door for
proper clearance.
STEP 3
Insert the caddy onto the wire frame as shown
(See Figure E).
Note: caddy can also be installed with large
compartment facing front (turned 180°).
2
All manuals and user guides at all-guides.com
FIG. A
FIG. B
FIG. C
FIG. D
FIG. E
Customer Service: 800-626-1126 | rev-a-shelf.com
Publicité
