Jabra LINK 14201-20 Guide De Démarrage Rapide page 6

To install your Jabra LINK solution
Settings:
1. Install your headset solution to your desk phone according to the
headset manual.
2. Set "Clear dial tone switch" in "A" position - see headset manual.
3. Ensure your headset base unit EHS mode is setup to DHSG -
see headset manual*.
Connections:
4. With the cable included with your headset system, connect the
phone socket in your headset base unit to the phone socket on
your Jabra Link.
5. To ensure you select the right cable for your Avaya desktop phone,
please see the cable matrix section. When you have selected
either , or
A B
your Jabra Link to the headset socket(icon) on your desk phone.
6. With the cable marked purple
ring tone detector socket in the Jabra Link, and place the ring
sensor as close as possible to the ringer sound outlet on your
desk phone.
7. With the cable marked red
headset base unit to the Jabra LINK AUX socket.
Note: When using the EHS adapter with Avaya phones, please note that the
MFB button on your headset acts as the Master button for on- and off-hooking
your telephone. This means that both devices can work independently, but the
MFB may override the headset button on the telephone.
* If your base unit does not support DHSG mode, RHL mode (GN default AUX mode) can be
used with limited functionality between phone and base unit – which means under installation
you may need to do hook ON and OFF a couple of times before phone and base/headset are in
sync. For RHL mode we recommend either to use your headset or phone to answer/end calls.
All manuals and user guides at all-guides.com
, connect the Headset/Handset socket(icon) on
C
, connect the 2,5 mm jack to the
, connect the AUX socket on your
7