Klarstein 10030505 Conseils D'utilisation page 6

• Insert the adaptor into the adaptor port located on the back of the product and plug it into the electrical
outlet.
Rotation switch: Select winding direction to be
• clockwise
• anti-clockwise
• auto (Bi-directional)
• off.
Timer switch: Select function A~D modes, and then the winder will start to revolve.
• (Mode A: 342 TPD) Auto rotate for 33 seconds, rest for 12 minutes and then repeat.
• (Mode B: 864 TPD) Auto rotate for 10 minutes, rest for 90 minutes and then repeat.
• (Mode C: 1080 TPD) Auto rotate for 30 minutes, rest for 3 hours and then repeat.
• (Mode D: 2160 TPD) Auto rotate for 1 hour, rest for 3 hours and then repeat.
(TPD: Turns Per Day. )
Mounting a watch
1. Open the lens cover to pull out the watch pillow inside the housing.
2. When you have placed the watch on the watch pillow please make sure it is properly set in the watch
winder.
All manuals and user guides at all-guides.com
Operation
timer switch rotation switch
watch pillow
extender
adaptor
port
watch pillow
6