Backmeister 85 91 76 Mode D'emploi page 14

Shaping Biscuits or Adding Decorations
1. Press the
The pusher (6) will press the dough down through the motif plate resp.
the decoration mixture through the nozzle.
2. If you want to push the dough resp. the decoration mixture slowly
through the motif plate resp. the nozzle, place the slider fast/slow in
direction "Slow". If you want to push the dough resp. the decoration
mixture faster through the motif plate resp. the nozzle, place the slider
in direction "Fast".
Hints:

Only use the motif discs for shaping biscuits. Only use the nozzles for
adding decoration mixture. Make sure the decoration mixture is soft
and creamy. Otherwise the nozzle will become stuck.

Line the baking tray with baking paper.

Do not use Teflon, fats or oil paper. Otherwise the biscuits will not
keep their shape.

Make sure the lock ring is securely tightened on the cylinder before
you switch on the unit.

How long you must press the
and shape of the biscuits. If you press the
will form a small biscuit. The longer you press the switch, the larger the
biscuit will be.

Repeat the steps until you have shaped a sufficient number of biscuits.
Make several attempts until you will form biscuits that match your
expectations.

Press the
mixture responds. It can happen that the mixture may continue to flow
out of the unit for a short time after switching off.

As soon as the decoration mixture start flowing from the nozzle, move
the pastry press according to the decorative design you wish to create.

If needed remove residues from the pastry press with a knife, pastry
scraper or similar.
All manuals and user guides at all-guides.com
Operation
switch in order to move the threaded rod downwards.
switch only shortly to start with in order to see how the
switch depends on the desired size
switch only shortly, you
10