Backmeister 85 91 76 Mode D'emploi page 13

Before first Use

Familiarize yourself with the unit before using for the first time.
Observe the safety instructions and only use the unit in compliance
with these operating instructions.

Remove all packaging components from the unit.

Clean all parts thoroughly before and after each use.
Intended Use
The electric pastry press is intended for shaping of biscuits and for decorating
cakes etc. The pastry press is intended for private use only and not for
continuous commercial operation.
Inserting the batteries and filling the unit
1. Hold the unit with one hand and turn with the other
hand the battery compartment lid (1) counter
clockwise.
2. Insert 4 fresh batteries of the type LR6 (AA) into
the battery compartment. Observe the right polari-
ty. Close the battery compartment with the lid.
3. Prepare the dough for the biscuits and leave it to
cool down. Make sure the dough is not too sticky.
4. Hold the unit with one hand and turn the cylinder (4) counter clockwise
in order to remove. Place the motif disc (8) or the nozzle (9) on the
cylinder and tighten it by using the lock ring (7).
5. Press the
Wrap the dough to get a roll and fill the cylinder with the dough. If neces-
sary, moisten the inside of the cylinder with water before filling it with
pastry. This will prevent sticking.
6. Screw the cylinder on the unit.
All manuals and user guides at all-guides.com
Operation
switch in order to lift up the threaded rod (5) completely.
9