Publicité
Les langues disponibles
Les langues disponibles
This entry show
s the status of your CPU, fan, warning for overall system status.
Frequency/Voltage Control
Use this menu to specify your
Load Optimized Defaults
Use this menu to load factor
operations.
BIOS Settin
g Password
Use this menu to set BIOS
Save & Exit Setup
Save changes to CM
OS and exit setup.
Exit Without Saving
Abandon all changes a
Frequency/Voltage
Current FSB Clock
It shows the current F
SB clock of . Read-only.
Adjust CPU Ratio
This item allows you
to adjust the CPU ratio. Setting range is from [8] to [50].
Auto Detect DIMM/PCI Clock
This item is used to auto detect
remove (turn off) clocks from empty DIMM and PCI slots to minimize the electromagnetic
interference (EMI).
Spread Spectrum
When the motherbo
ard's clock generator pulses, the extreme values (spikes) of the pulses
creates EMI (Electromagnetic Interference). The Spread Spectrum function reduces the EMI
generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curv
If you do not have any EMI problem, leave the setting at Disabled for optimal system stability and
performance. But if you are plagued by EMI, set to Enabled for EMI reduction. Remember to
disable Spread Spectrum if you are overclocking because even a slight jitter can introduce a
temporary boost in clock speed which may just cause your overclocked processor to lock up.
All manuals and user guides at all-guides.com
settings for frequency/voltage control.
y default settings into the BIOS for stable system performance
setting Password.
nd exit setup.
the DIMM and PCI slots. When set to [Enabled], the system will
11
es.
Publicité
