Westinghouse NCCO SP6390 Manuel De Fonctionnement page 9

All manuals and user guides at all-guides.com
OPERATION INSTRUCTIONS
POWER ON/OFF
1.
Power on: Press power button to turn on the appliance.
An alert tone will be on to signal that the appliance is
connected with electricity.
Power off: Press the power button to turn the appliance
off.
SELECT FAN SPEED
2.
To Accelerate: Use finger to slide to right, on the Fan
Speed Control; Or, click the bar to select the fan speed.
To Decelerate: Use finger to slide to left, on the Fan
Speed Control; Or, click the bar to select the fan speed
3. SELECT TURBO MODE
Use finger to slide to the Highest Fan Speed, press and
hold for 3 seconds on theright-hand side of the slide bar,
then it will switch to Turbo Mode (SS).
Turbo mode can be used for highly polluted area.
To turn offTurbo Mode:
Press and hold for 3 seconds on theright hand of the
slide bar or restart the appliance.
4. FACTORY DEFAULT SETTING AND MEMORY FUNCTION
Factory Default Setting:
Appliance will return to fan speed of "03" each time,
when it is not connected to electricity socket.
Memory Function:
Appliance will remainat the same fan speed as last
usage when it stays connect to electricity socket.
5. ECO MODE
Press the button "ECO" to activate ECO Mode and it will
display "Eo".
Appliance will automatically switch to a lower fan speed
and all lights will be dimmed.
To Activate: Press the button "ECO" button positions on
the right-hand side of the display.
To Deactivate: Press the "ECO" button to deactivate and
return to Fan Speed mode.
9
ToAccelerate
ToDecelerate