Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
ERROR CODES
ERROR CODE
EE
HP
NC
FLITER AND REACTOR REPLACEMENT
HP; HEPA Filter Replacement:
The Default operation time of HEPA Filter is 3,000 hours.
HEPA Filter Reminding: After user has turned on unit, the ON / OFF
Button, the Display Screen and the red 'NCCO' Filter Installation
Indicator are illuminated, and the blower and other functions still
normally operate. The Reminding Mode can be released only after
user has replaced HEPA Filter with the following steps.
NC; NCCO Reactor Replacement:
The Default operation time of NCCO Reactor is 11,000 hours.
NCCO Reactor Reminding: After user has turned on unit, the ON /
OFF Button and the Display screen are illuminated, the red 'NCCO'
Filter Installation Indicator flickers every 0.5 seconds with 'Bi Bi'
sound, and the blower are other functions still normally operate.
The Reminding Mode can be released only after user has replaced
NCCO Reactor with the following steps.
After Completing Replacment Re-Set the Appliance:
1. When the ON / OFF Button, the Display Screen and the red
'NCCO' Filter Installation Indicator are illuminated, user shall turn off
unit and long press the ON / OFF Button for 10 seconds until hearing
a 'Da' sound. Then, press the Air Speed Reduce Indicator
displays at Display Screen for 3 seconds indicating that the unit has
exited the Reminding Mode. User can turn on unit to operate it again.
DESCRIPTION
HEPA Filter not installed filter properly
Please remove and reinstall the filter
HEPA need to replace,
which reached 3,000 hours
NCCO reactor need to inspect,
which reached 10,000 hours
15
. 'HF'
Publicité
