Publicité
Les langues disponibles
Les langues disponibles
TEMPERATURE SETTING
①power key
②illumination lamp key
⑥temperature "+" key ⑦temperature"-" key ⑧Fahrenheit switchover
display screen
Quick start
1.
2.
Power on/off button:
3.
1.
Press this button for 5S, and then all external power sources will be
disconnected and all external equipment will be turned off, with the cooler in
ready mode, the display screen will indicate "οϜ" for 60s.
2. When the cooler is in the ready mode, press this power button for 5S, the
cooler will restore its normal operation and work under real-time conditions.
Lamp control button
4.
Press the lamp control button, the LED lamp is lighted. When the LED lamp is
on,
"white"→"yellow"→"blue"→ "white" three colors each time this button is
pressed. The LED lamp is on for 10 minutes if no operation. You can turn off
the lamp by pressing this button for 3s. The lamp will turn off if there is no
operation for 10 mins
Child lock button (combined button)
Lock: The key will be locked automatically after power-on or 30s if no
button is operated, or the button will be locked when the button is
pressed for long.
Unlock: To unlock the button, press both buttons at the same time for
3s followed an alert tone . Any operation should be in unlock mode.
Celsius degree/ Fahrenheit degree switchover button (combined
button)
Press both buttons at the same time, and then you can switch over
between the Celsius degree and Fahrenheit degree for display. Each
time the button is pressed, a switchover will be made.
the system temperature, it is not allowed to switch over between the
Celsius degree and Fahrenheit degree.
the
color
can
③ convert
④up(left) display screen ⑤bottom(right)
be
adjusted
according
29
When setting
the
cycle
of
Publicité
