Flex LRP 1503 VRA Notice D'instruction D'origine page 19

LRP 1503 VRA
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Replacing wearing parts
During the operating time of the belt sander the
felt pads on the rocker wear out. Spare parts
are available from the manufacturer or your
dealer.
Spare parts and accessories
Spare-part/Accessory
Handle
Felt pad
– large
– small
Plastic carrying case
Other accessories can be found in the
manufacturer's catalogues.
Exploded drawings and spare-part lists can
be found on our homepage:
www.flex-tools.com
Disposal information
t^okfkd>
oÉåÇÉê=êÉÇìåÇ~åí=éçïÉê=íççäë=ìåìë~ÄäÉ=
Äó êÉãçîáåÖ=íÜÉ=éçïÉê=ÅçêÇK
EU countries only
Do not throw electric power tools
into the household waste!
All manuals and user guides at all-guides.com
Order no.
194.034
324.728
324.736
327.603
In accordance with the European Directive
2012/19/EC on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
klqb
mäÉ~ëÉ=~ëâ=óçìê=ÇÉ~äÉê=~Äçìí=Çáëéçë~ä=
çéíáçåë>
-Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical
specifications" conforms to the following
standards or normative documents:
EN 60745 in accordance with the regu-
lations of the directives
2004/108/EC (until 19.04.2016),
2014/30/EU (from 20.04.2016),
2006/42/EC, 2011/65/EC.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Eckhard Rühle Klaus Peter Weinper
Manager Research &
Head of Quality
Development (R & D) Department (QD)
29.06.2015
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Exemption from liability
The manufacturer and his representative are
not liable for any damage and lost profit due to
interruption in business caused by the product
or by an unusable product.
The manufacturer and his representative are
not liable for any damage which was caused by
improper use of the power tool or by use of the
power tool with products from other
manufacturers.
19