POLTI FORZASPIRA C 115 Manuel D'instructions page 19

CORRECT USE OF THE PRODUCT
This appliance is intended for internal home
use as a vacuum of dry material, in accordan-
ce with the descriptions and instructions con-
tained in this manual. Please read these in-
structions carefully and keep them. If this
manual is lost, it can be consulted and/or
downloaded from the website www.polti.com.
Only vacuum domestic dirt.
Do not use on debris or chalk, cement or resi-
dues from building sites or brick laying.
Do not use on earth and sand/soil, etc.
Do not use on ash, soot and combustion resi-
dues (fireplaces, barbecues, etc.).
Do not use on printer, photocopier or fax to-
ner and ink powder.
Do not vacuum pointed, sharp or stiff objects.
The appliance only functions correctly with
the collector inserted, and complete with all
its parts.
Correct use of the product is only as detailed in
this instruction manual. Any other use may da-
mage the appliance and invalidate the warranty.
Polti S.p.A. reserves the right to change
equipment or accessory specification without
prior notice.
INFORMATION FOR USERS
Pursuant to European Directive 2012/19/EU,
regarding electric and electronic appliances,
this appliance must not be disposed of with
domestic waste, but sent to an official collec-
tion facility. This appliance complies with EU
Directive 2011/65/EU
The crossed-out bin symbol on the
appliance indicates that, at the end
of its useful lifespan, the product
must be disposed of separately from
other waste. Therefore, at the end of its life,
the user must handover the appliance to an
appropriate collection centre for electric and
electronic waste. Proper separate waste col-
lection to facilitate the subsequent recycling,
treatment and environmentally compatible
disposal of the appliance helps to prevent ne-
gative effects on the environment and human
health, and promotes recycling of the mate-
rials the product is made of. Unlawful disposal
by the owner involves the application of the
administrative sanctions envisaged by current
legislation.
1. PREPARATION OF THE APPLIANCE
1.1 Remove the appliance from the packaging,
checking that the product is whole and that
all the parts are there.
1.2 Insert the suction opening of the flexible
tube into the connector (1). To disconnect it
from the appliance press the keys and pull the
flexible hose (2).
1.3 Unwind the power supply cable and insert
the plug into a suitable power socket (3).
2. CONNECTION OF ACCESSORIES
All the accessories can be connected directly
to the flexible hose or to the telescopic tube.
Just connect them together.
3. CLEANING HARD FLOORS
3.1 Make sure that chapter 1 has been completed.
3.2 Connect the telescopic tube to the flexible
hose and the floor brush to the telescopic tube.
The length of the telescopic tube can be adju-
sted. Press the button to extend it or shorten
it at will (4).
3.3 Move the selector located on the brush,
pressing it with a foot, to the bristles-exten-
ded position (5).
3.4 Press the (6) switch. The appliance will
start to operate.
You can adjust the suction power with the
cursor(6).
3.5 To end suction, press the
again.
4. CLEANING DELICATE FLOORS
4.1 Make sure that chapter 1 has been completed.
4.2 Connect the telescopic tube to the flexible
hose and the parquet brush to the telescopic
tube.
The length of the telescopic tube can be adju-
sted. Press the button to extend it or shorten
it at will (4).
4.3 Press the (6) switch. The appliance will
start to operate.
You can adjust the suction power with the
cursor(6).
4.4 To end suction, press the
again.
5. CLEANING CARPETS AND RUGS
5.1 Make sure that chapter 1 has been completed.
5.2 Connect the telescopic tube to the flexible
| 19 |
(6) switch
(6) switch