Télécharger Imprimer la page

solcore OASI HT 2000 Mode D'emploi page 10

Publicité

Les langues disponibles

Les langues disponibles

During function, place the heater in a safe position:
-
at least 2m far from inflammable objects or furnitures;
-
leaving not less than 2m of free space in front of the heater;
-
not located immediately below a socket-outlet.
Do not use the heater in places with explosive gas or while using
inflammable solvents or varnish or glues.
If the cordset is damaged and you have to change it, do not do
the job yourselves! Take the product to an after sales authorised
repair centre or to a person with similar skill and knowledge, in
order to avoid any risk of danger.
The appliance must be positioned so that the plug is always ac-
cessible.
Do not mount the product on walls made of synthetic material.
The heater has to be installed at least 1,8 m above the floor.
WARNING: Operate this heater at a distance of 2 m from textile,
curtains and/or any flammable materials.
WARNING: this heating appliance is not equipped with a device
to control the room temperature. Do not use the heater in small
rooms when they are occupied by persons not capable of leaving
the room on their own, unless constant supervision is provided by
a person responsible for their safety.
The installation must include the use of a dedicated disconnection
device incorporated in the electrical system. Such device must
ensure all-pole disconnection from the mains with a contact ope-
ning distance that allows complete disconnection in the conditions
of overvoltage category III.
This product is for outdoor use only.
10

Publicité

loading