Black & Decker KA83 Mode D'emploi page 20

ENGLISH
damage or reduce the performance of your
Black & Decker product and may also endanger the
user. The terms and conditions of the warranty may
also be effected.
OUR AFTER SALES SERVICE POLICY
(UK, AUSTRALIA AND NEW ZEALAND ONLY)
It is our aim that all Black & Decker customers should
be totally satisfied with their Black & Decker product
and after sales service, but if help or advice is needed
please contact a local Black & Decker authorised
repair agent who will be happy to help. Full details of
our after sales service can be obtained from any of our
Black & Decker authorised repair agents.
ACCESSORIES
The performance of any power tool is dependant upon
the accessory used. Black & Decker accessories are
engineered to high quality standards and are designed
to enhance the performance of your tool. Buying a
Black & Decker accessory will ensure that you get the
very best from your Black & Decker tool.
TECHNICAL DATA
The level of sound pressure of the tool is in accordance
with EEC legislation. It is recommended that you take
appropriate measures for the protection of your hearing
if the sound level seems uncomfortable. This normally
equates to a sound pressure in excess of 85dB (A).
Your sander includes some or all of these features.
Note: This user manual also covers more than one
catalogue number within this product group. Refer to
your carton for details of your product.
FEATURES
1 •
•
•
2 •
8
•
4 •
3
5
•
6
7
9
20
All manuals and user guides at all-guides.com
3
5
•
6
•
2
• •
1
•
•
10
•
•
4
• •
•
8
1. Front handle
2. Dust collection bag or vacuum cleaner connection
3. Lock-on switch
4. Tracking adjustment knob
5. On/off switch
6. Drive roller
7. Sanding belt tension lever
8. Front belt roller
9. Belt rotation direction indicator
10. Belt speed control (electronic models only)
OPERATING YOUR BELT SANDER
If continuous operation is required, proceed as follows:
To stop your belt sander, proceed as follows:
Depress the on/off switch to release the lock-on button.
Release the on/off switch.
BELT SPEED CONTROL (ELECTRONIC MODELS ONLY)
Belt speed control is provided to aid the achievement
Material Electronic position
Solid wood 5-max
Veneer 3-4
Chipboard max
Plastics 2-5
Steel 5-max
Paint removal 6-max
Balsa wood 1-3
Acrylic 1-2
To start your belt sander,
depress the on/off
switch (5).
To stop your belt sander
release the on/off
switch.
Depress the on/off
switch (5).
Depress the lock-on
button (3) and release
the on/off switch.
of a perfect finish.
Various factors affect
the finish (material,
speed and grit), you can
use the following table
to help choose the
correct speed and grit
for the job.
Belt grit
80
150
60/80
100
80
40/60
100
100