Miles Industries Valor 555CFK Directives D'installation page 6

Installation with Valor Model Madrona MF28
1. Remove the mounting plate from the fan and
discard it.
2. Position the fan in such way that its exhaust is
directed upwards, towards the space between the
inner and the outer walls of the fi rebox.
3. Using 3 screws, fi x the fan to the fi rebox bracket.
Rear of the fi rebox
4. Fix the fan control box bracket provided to the
control box with 2 screws.
5. Fix the bracket with the control box attached to the
base of the stove from underneath.
Fan control
Fan control
box position
box bracket
Stove MFCS01 or MFCS02
Arched or Square Fronted
6
All manuals and user guides at all-guides.com
Unscrew 3 screws and
remove fan mounting
plate
Fan
Fan control
box position
Fan control
box bracket
Modern Stove MFCS05
6. Fix the thermoswitch to the underside of the burner
plate, behind the pilot area, with 2 screws taken
from the burner plate.
Fasten thermal switch to
underside of burner module
using 2 existing screws
7. Test the fan operation as indicated on page 3 of
this manual.
8. Finish the assembly of the fi replace as indicated
in the installation manuals provided with the
fi replace's engine, front and trim.