Miles Industries Valor 555CFK Directives D'installation page 5

Installation with Valor Model Retrofi re RF24 (Direct Vent ONLY)
4. Fasten the fan control box to lower right hand
support leg. (The control box may alternatively be
fl ipped over and secured to the left hand support
leg if desired.)
Fan and Bracket installed
with 2 mounting screws
Fasten Fan Control Box
to lower RH Support Leg
using 1 screw
5. Fasten the thermal switch to underside of burner
module using 2 screws.
Fasten thermal switch to
underside of burner module
using 2 existing screws
6. Test the fan operation as indicated on page 3 of
this manual.
7. Finish the assembly of the fi replace as indicated
in the installation manuals provided with the
fi replace's engine, front and trim.
All manuals and user guides at all-guides.com
5