Télécharger Imprimer la page

Beko CFM6350I Mode D'emploi page 9

Masquer les pouces Voir aussi pour CFM6350I:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
3
Operation
3.1 Preparation
A
WARNING: First time use: Run
the appliance at least 4 times
without adding coffee.
A
WARNING: Please follow the
steps 1 - 2 and 7 - 12 in the "Brewing
Coffee" section.
1. Remove all packaging and stickers and
dispose of them according to applicable legal
regulations.
2. Before using the appliance for the first time,
clean all parts which come into contact with
water carefully. Please see full details in the
"Cleaning and Care" section.
3. Make sure that the appliance is placed in an
upright position and on a stable, flat, clean, dry,
and non-slip surface.
3.2 Brewing Coffee
1. Pull off and fill the glass jug (6) with the required
amount of water, but do not fill past the "10"
mark. The brewed amount of coffee will be 10%
less than the filled water, because it is absorbed
by the coffee grounds and the filter.
C
For the good coffee taste it is
suggested to operate the appliance
with at least 4 cups coffee serving.
For improved heat retention we
C
recommend that you rinse the pot
with hot water before starting the
brewing process.
C
Use only clean, cold, and fresh
drinking water.
Coffee Maker / User Manual
All manuals and user guides at all-guides.com
C
2. Open the filter basket cover (1).
3. Pull out the filter basket (2).
4. Pour the water in the glass jug into the water
5. Fill the filter basket (2) with the desired amount
6. Insert the filter basket (2) back into the housing
7. Place the glass jug (6) on the warming plate (8).
A
8. Connect the plug to the wall socket.
9. Turn the appliance on by pushing the On/Off
C
C
There is a drip hole on the back
of the water reservoir to prevent
exceeding the capacity of the coffee
maker. If you add too much water,
it will drip out from the back of the
appliance.
reservoir.
of ground coffee. To do this, you may use the
supplied measuring spoon.
and close the filter basket cover (1).
WARNING: If the glass jug (6)
is not placed accurately, the drip-
stop (5) function will not function
properly. It could cause hot water or
hot coffee to overflow.
button (7).
– The On/Off button (7) illuminates and the
brewing process begins.
The brewing process can be stopped
at any time by pushing the On/Off
button (7) again.
The appliance is equipped with a
drip-stop (5) located underneath
the filter basket (2) and enables
you to briefly remove the glass jug
(6) to pour coffee before the water
has fi-nished running through the
machine.
9 / EN

Publicité

loading