Publicité
Les langues disponibles
Les langues disponibles
• Cleaners: Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on any surface.
• Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for periodic waxing, use silicon
wax.
• Cooler Section: Wash shelves and other removable parts in warm sudsy water, rinse and dry. Wash interior
with baking soda solution (3 tablespoons to I liter of water) or warm sudsy water, rinse and dry.
• Magnetic Door Seals: Wash with warm sudsy water.
• The Finishing Touch: Replace all parts and return thermostat dial to desired setting.
• Install cooler in a convenient location away from extreme heat and cold. Allow sufficient clearance between
the cooler and side wall so the door will open without obstruction. Cooler is not designed for recessed ins-
tallation.
• Select a space with strong level floor.
• Allow 2 inches (5cm) of space between the cooler's side & wall and 4 inches (10cm) between back & the wall.
Problem
Temperature inside the wine
cooler is too warm.
Vibrations.
The inside light flashes.
All manuals and user guides at all-guides.com
Cleaning and Care
Installation
Troubleshooting
Possuble Cause
Temperature control is set too warm. Turn the control to a cooler
setting and allow several hours for the temperature to stabilize.
Door is kept open too long or is opened too frequently. Warm air
enters the wine cooler every time the door is opened. Open the door
less often.
The door is not closed completely.
The door gasket does not seal properly.
The wine cooler has recently been disconnected for a period of time. 4
hours are required for the wine cooler to cool down completely.
Check to ensure that the wine cooler is on a level surface.
The wine cooler is touching the wall. Re-level the wine cooler and
move it from the wall. If continued vibration occurs, turn off the wine
cooler and unplug the power plug. Contact Customer Service Dept.
for further assistance.
Set temperature is higher than inner temperature.
The automatic defrost function starting to work,
8
Publicité
