Publicité
Liens rapides
Item# 4398
Autumn 4-in-1 Convertible Mini Crib
Assembly Instructions
Petit lit à barreaux Autumn 4 en 1
Manuel d'assemblage
* Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
* Lire toutes les instructions AVANT l'assemblage du lit.
GARDER LE MANUEL POUR UN USAGE ULTERIEUR.
revised 10JUL2020
1
Publicité
Manuels Connexes pour DaVinci Autumn 4 en 1
Sommaire des Matières pour DaVinci Autumn 4 en 1
- Page 1 Item# 4398 Autumn 4-in-1 Convertible Mini Crib Assembly Instructions Petit lit à barreaux Autumn 4 en 1 Manuel d’assemblage * Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE. * Lire toutes les instructions AVANT l’assemblage du lit.
- Page 2 Thank you for purchasing a DaVinci nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.davincibaby.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly.
- Page 3 PARTS • PIÈCES Not to Scale/Pas à l'échelle A-1. Headboard B. Footboard C. Left side panel A-1. Tête de lit B. Pied de lit C. Panneau latéral gauche E. Front Left Leg E. Pied avant gauche D. Right side panel I-1.
- Page 4 HARDWARE • ACCESSOIRES DE MONTAGE Bolts in Actual Size/Boulons (taille réelle) H1. 3” Phillips Head Bolt with Barrel nut (4) H2. 2-1/4” Phillips Head Bolt with Barrel nut (4) H1. Boulon à tête cruciforme H2. Boulon à tête cruciforme de 7,6 cm avec écrou à portée (3 po) (4) de 5,7 cm avec écrou à...
- Page 5 ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE H4 H8 H8 H14...
- Page 6 H8 H2 H8 H2...
- Page 7 * Make sure the mattress sup- port board (I-1&I-2) is installed FLAT SIDE UP. * Make sure the mattress sup- port board (I-1&I-2) is level. Do not overtighten the bolts. * S’assurer que le panneau de Ne pas trop serrer les boulons. matelas (I-1&I-2) bien...
- Page 8 H1 H8 H1 H8...
- Page 9 Outside Extérieur * Rotate H11 clockwise to secure. * Tourner H11 dans le sens horaire pour fixer. Outside Extérieur...
- Page 10 Finish Terminé * Recheck all screws and bolts to be sure they are fastened securely. *Revérifier le serrage de tous les boulons et des vis. DO NOT OVERTIGHTEN. NE PAS TROP SERRER. READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
- Page 11 CAUTION: Use ONLY mattress/pad provided by manufacturer (which must be at least 36.75 in. long by 23.25 in. wide and not more than 5 in. thick). Please refer to the label (sample below) on the inside face WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL of the headboard.
- Page 12 Check this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly and frequently during use. DO NOT use crib if any parts are missing, damaged or broken. Contact DAVINCI for replacement parts and instructional literature if needed. DO NOT substitute parts.
- Page 13 Ne pas utiliser le lit si des pièces sont manquantes, endommagées ou cassées. Contacter DAVINCI pour le remplacement des pièces et du manuel en cas de besoin. NE PAS substituer des pièces.
- Page 14 ONE YEAR LIMITED WARRANTY: We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request.
- Page 15 Item# 20399 Mini Toddler Bed Conversion Kit (20399 - Sold Separately) Ensemble de conversion en (20399 - vendues séparément) petit lit pour tout-petit M20399 Mini Toddler Bed Conversion Kit (M20399) is not included and sold separately. Please contact your retailer or purchase on www.davincibaby.com L’ensemble de conversion en petit lit pour tout-petit (M20399) n’est pas fourni.
- Page 16 ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE * Make sure the mattress support (I-1&I-2) locates at the lowest level. * Assurez-vous que le support matelas (I-1&I-2) se trouve au niveau le plus bas. Footboard Pied de lit M20399 Finish Terminé DO NOT OVERTIGHTEN. NE PAS TROP SERRER.
- Page 17 Item# 5789 Full Size Conversion Kit (5789 - Sold Separately) Traverses de conversion (5789 - vendues séparément) This crib is convertible to a twin-sized bed. M5789 Full Size Conversion Rail is recommended, please contact your retailer or purchase on www.davincibaby.com Ce lit peut être converti en un lit de jumeau.
- Page 18 IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: WWW.DAVINCIBABY.COM/PARTS OR YOU CAN CONTACT US BY MAIL: DAVINCI 8700 REX RD., PICO RIVERA, CA 90660 (323) 768-0183 www.davincibaby.com L’enregistrement de votre produit est plus facile que jamais. Veuillez l’enregistrer sur notre site Web à...