Manuels Connexes pour DaVinci 7391
Sommaire des Matières pour DaVinci 7391
- Page 1 Item# 7391 Jenny Lind 3-in-1 Convertible crib Assembly Instructions Lit de bébé 3 en 1 Jenny Lind Manuel d’assemblage revised 19SEP2018...
- Page 2 Thank you for purchasing a DaVinci nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.themdbfamily.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly.
- Page 3 PARTS • PIÈCES Not to Scale/Pas à l'échelle C. Stationary Side (2) C. La côté fixe (2) A. Left Headboard B. Right Headboard A. La tête de lit gauche B. La tête de lit droite E. Mattress Support III E. Support du matelas III HARDWARE •...
- Page 4 ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE * Make sure the mattress support III (E) is installed properly. THE FLAT SIDE * Make sure the smattress support III (E) is level. * S’assurer que le support du matelas III (E) est bien installé...
- Page 5 Optional / En option : KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. Recheck all screws and bolts to be sure they are fastened securely. Do not overtighten. Before using your crib, please read all cautionary statements on the insert sheet. GARDER CE MANUEL EN LIEU SÛR POUR UN USAGE Finish...
- Page 6 CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 INCHES (69CM) BY 51 5/8 INCHES (131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM). Please refer to the label (sample below) on the inside face WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL of the headboard.
- Page 7 WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death. READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP THE MANUAL FOR FUTURE USE. WARNING: Parents should ensure a safe environment for the child by checking regularly, before placing the child in the product, that every component is properly and securely in place.
- Page 8 AVERTISSEMENT : Le non respect des avertissements et directives d’as- semblage peut entraîner de graves blessures ou la mort. LIRE TOUTES LES INSTRUCTIONS AVANT D’ASSEMBLER LE LIT. CONSERVER CE MANUEL POUR UN USAGE ULTÉRIEUR. AVERTISSEMENT : Avant de placer l’enfant dans ce lit, les parents doivent s’assurer que son environnement est sécuritaire en vérifiant régulièrement que toutes les composantes sont correctement fixées.
- Page 9 ONE YEAR LIMITED WARRANTY: GARANTIE LIMITÉE D’UN AN : Nous remplacerons toute pièce manquant au moment We will replace any missing parts at the time de l’achat ou tout article défectueux au cours de la of purchase or any defective item within a période de garantie d’un an à...
- Page 10 Item# 3199 Toddler Bed Conversion Kit (3199 - Sold Separately) Ensemble de conversion en lit pour tout-petit (3199 - vendues séparément) M3199 Toddler Bed Conversion Kit (M3199) is not included and sold separately. Please contact your retailer or purchase on milliondollarbabyco.com L’ensemble de conversion en lit pour tout-petit (M3199) n’est pas fourni.
- Page 11 ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE * Make sure the mattress support III (E) locates at the lowest level. * Assurez-vous que le support de matelas III (E) se trouve au niveau le plus bas. M3199 Finish Terminé DO NOT OVERTIGHTEN. NE PAS TROP SERRER.
- Page 12 TO AVOID DANGEROUS GAPS, ANY MATTRESS USED IN THIS BED SHALL BE A FULL-SIZE CRIB MATTRESS AT LEAST 51 5⁄8 IN. (1310 MM) IN LENGTH, 27 1⁄4 IN. (690 MM) IN WIDTH, AND A MAX THICKNESS OF 6 IN. (150 MM). POUR ÉVITER TOUT ÉCART DANGEREUX, LE MATELAS UTILISÉ...