Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
H-6262
DRAWER FOR STAINLESS
STEEL WORKTABLE
TOOLS NEEDED
Electric Drill
Poly Slide x 2
NOTE: Depending on table purchased, the
leg channel assemblies will either come with
pre-drilled holes and fastened screws, or
with knockout style holes that will need to be
punched out.
1a. Choose drawer mounting location. Using a Phillips
head screwdriver, remove four pre-installed screws
from the leg channel assemblies. (See Figure 1a)
NOTE: Mounting locations must have pre-drilled
holes located 22⁄" apart to accommodate
drawer.
PAGE 1 OF 6
1-800-295-5510
uline.com
Phillips Screwdriver
Hammer
#8 x 1/2"
1" Screw x 4
Drill Screw
x 2
PARTS
Drawer Stop x 1
ASSEMBLY
Figure 1a
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
DRAWER CAPACITY PER TABLE
SIZE
CAPACITY
36"
1 Centered
48"
1 Centered
60"
1 Centered; or 1 Left and 1 Right
72"
1 Centered; or 1 Left and 1 Right
96"
1 Left and 1 Right
Drawer x 1
Table (underneath)
Leg Channel
Assemblies
1222 IH-6262
Publicité
Manuels Connexes pour Uline H-6262
Sommaire des Matières pour Uline H-6262
- Page 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-6262 1-800-295-5510 uline.com DRAWER FOR STAINLESS STEEL WORKTABLE TOOLS NEEDED DRAWER CAPACITY PER TABLE SIZE CAPACITY 36" 1 Centered Phillips Screwdriver Electric Drill Hammer 48" 1 Centered 60"...
- Page 2 NOTE: Some tables may come with bolts Poly Slide pre-threaded in leg channels. If so, re-use (left) these to attach poly slides. Poly Slide Figure 2 (right) Leg Channel Drawer Screw Poly Slide (left) Poly Slide (right) 1-800-295-5510 uline.com PAGE 2 OF 6 1222 IH-6262...
- Page 3 H-6262 800-295-5510 uline.mx CAJÓN PARA MESA DE TRABAJO DE ACERO INOXIDABLE HERRAMIENTAS NECESARIAS NÚMERO DE CAJONES POR MESA TAMAÑO CAPACIDAD 36" 1 Centrado 48" 1 Centrado Desarmador de Cruz Martillo Taladro Eléctrico 60" 1 Centrado; o 1 a la Izquierda y 1 a la Derecha 72"...
- Page 4 Si (derecha) fuera así, reutilícelos para fijar los rieles de poli. Diagrama 2 Cajón Canal de las Patas Tornillo Riel de Poli (izquierda) Riel de Poli (derecha) 800-295-5510 uline.mx PAGE 4 OF 6 1222 IH-6262...
- Page 5 H-6262 1-800-295-5510 uline.ca TIROIR POUR TABLE DE TRAVAIL EN ACIER INOXYDABLE OUTILS REQUIS CAPACITÉ DU TIROIR PAR TABLE TAILLE CAPACITÉ 36 po 1 au centre 48 po 1 au centre Marteau Tournevis cruciforme Perceuse électrique 60 po 1 au centre; ou 1 à gauche et 1 à droite 72 po 1 au centre;...
- Page 6 Si c'est le cas pour votre table, réutilisez (gauche) ces boulons pour fixer les coulisses en poly. Coulisse en poly (droite) Figure 2 Profilé de pied Tiroir Coulisse en poly (gauche) Coulisse en poly (droite) 1-800-295-5510 uline.ca PAGE 6 OF 6 1222 IH-6262...