Opale-Paramodels Backpack L2 Mode D'emploi page 17

All manuals and user guides at all-guides.com
Insert the mobile rod into the pilot harness as
showned
Lock the rod with a CHC M3-8 screw and a M3 wide
washer
Insert an elastic between the pilot's back and the
harness.
Fix it on both sides of the frame as shown in the pho-
to, to obtain optimal support for the pilot.
For the selection of anchor points, the chassis must
have a horizontal attitude when held by the risers.
If the chassis is upset, it will be necessary in this case
to move back the elevators. If it is going down, then
advance the elevators to restore the balance.
O p al e - Paramo d el s. co m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
17
contact@opale-paramodels.com +33(0)981 144 387