Windscreen - MicroMic AKG C420 Mode D'emploi

3 Operating Notes

3.2 Windscreen

4 Specifications
4.1 Microphone
Type:
Polar pattern:
Frequency range:
Sensitivity:
Electrical Impedance at 1000 Hz:
Recommended load impedance:
Max. SPL for 1% / 3% THD:
Equivalent noise level:
Supply voltage:
C 420:
C 420 L:
C 420 B/lock:
Current consumption:
Connector:
Finish:
Size:
Cable length:
Net weight:
18
If (for instance, in outdoor use) excessive wind or
pop noise becomes audible, attach the supplied
windscreen to the microphone.
1. Slide the windscreen onto the microphone
capsule.
2. Pull the windscreen over the outer edge of the
microphone capsule.
Pre-polarized condenser microphone
Cardioid
20 Hz to 20,000 Hz
5 mV/Pa (-46 dBV re 1 V/Pa)
200 Ω
>2000 Ω
126 dB / 130 dB
33 dB (to DIN 45412)
9 to 52 V universal phantom power
9 V battery supply through B 29 or body-
pack transmitter, or 9 to 52 V universal
phantom power through MPA II adapter
9 V battery supply through B 29 or 9 to
52 V universal phantom power through
MPA II adapter
Approx. 2 mA
3-pin male XLR
Matte black
130 mm (5.2 in.) in dia.
3 m (10 ft.)
30 g (1.1 oz.) exc. of connector