Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Place the tool against the wall.
Switch on the tool in auto-levelling mode.
Note: the laser lines will only level if the tool is kept within 5°
from vertical.
Using the laser in locked/layout mode (fig. F)
Direct the laser line if necessary.
Rotate the unit if necessary.
Place the tool against the wall.
Switch on the tool in locked/layout mode.
Using the protractor
The protractor (3) can be used to transfer an angle.
The protactor screen illuminates in locked/layout mode.
Position the unit with the laser line at the reference point.
Align the 0° position on the protractor with the laser line.
Rotate the unit into the desired angle.
Cleaning and maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
To clean the tool, use only mild soap and a damp cloth.
Never let any liquid get inside the tool and never immerse
any part of the tool into liquid.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
6
All manuals and user guides at all-guides.com
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Technical data
Voltage
Battery size
Wave length
Laser class
Laser power
Laser length
Accuracy (at 3 m)
Operating temperature
Weight
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement is
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member States
of the European Union and the European Free Trade Area.
If a Black & Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 24 months
from the date of purchase, Black & Decker guarantees to
replace defective parts, repair products subjected to fair wear
and tear or replace such products to ensure minimum
inconvenience to the customer unless:
At the end of their useful life, discard batteries with
due care for our environment.
Remove the batteries as described above.
Place the batteries in a suitable packaging to ensure that
the terminals cannot be short-circuited.
Take the batteries to a local recycling station.
EC declaration of conformity
BDL170B
Black & Decker declares that these products conform to:
89/336/EEC, IEC 60825-1, EN 61010 & EN 61000-61
Director of Consumer Engineering
Spennymoor, County Durham DL16 6JG,
BDL170B
V 3
2 x LR03 (AAA)
nm 630-690
2
mW < 4
cm 300
mm +/- 3
°C 0 - 40
kg 0.3
Kevin Hewitt
United Kingdom
01-10-2006
Publicité
