Publicité
STEP 5
Using the paper template,
position the center-line to the
center of the cabinet and use
your 3/32" drill-bit to pre-drill
your screw locations
(See Figure 4).
3
32
STEP 6
Remove the paper template
and use (4) 3/4" x #8 oval head
screws to attach the universal
bracket to the bottom of the
cabinet (See Figure 5).
#2
#2
#2
STEP 7
Repeat Steps 4-6 for installing
the universal bracket to the top
of the cabinet (See Figure 6).
STEP 8
Place the tray on the bottom
universal bracket (See Figure
7).
STEP 9
Place the positioner base
on the shelf support top of
the bottom shelf and then
place the next shelf on top of
positioner base (See Figure 8).
FIG. 4
FIG. 5
FIG. 7
FIG. 8
FIG. 6
3
Publicité
