LUCCI BREEZER Serie Guide D'installation page 6

INSTALL THE DOWN ROD
1. Loosen and remove the ball joint (1) and pins from down rod (2).
2. Feed the motor wires (4) through the down rod (2) and attach the down rod (2) to the hanger (5)
with the bolt (6) and pin (7).
3. Adjust the rocking screws (8) to ensure down rod (2) is centrally located in the hanger (5).
4. Install canopy (3) over the downrod (2).
5. Refit the ball joint (1) onto the downrod (2). Ensure all pins and screws are secure.
BLADE ATTACHMENT
Assemble the blades & holders using the screw set (2 and 3). (Fig. 5)
1.
Secure the blade holder on the motor by using two motor screws (5) with washers to tighten it
2.
ensuring they are tightened simultaneously. (Fig.6). Once completed, repeat the process on
remaining blades.
All manuals and user guides at all-guides.com
BLADE INSTALLATION
Fig. 5
6
Fig. 4
Fig. 6