AFG 5.3AT Manuel Du Propriétaire page 9

ASSEMBLY STEP 7
2
G 10
H
1 11
16
AFG14_OM_5.3AT_7.3AT_Rev1_3.indd 16-17
HARDWARE FOR STEP 7
PART TYPE QTY
G SCREW 6
H SCREW 2
A Fold the deck into the upright position until
the FOOT LATCH (11) engages.
B Open HARDWARE FOR STEP 7.
C Attach BASE FRAME COVER (10) to
CONSOLE MAST (2) using 1 SCREW (H)
from the side.
D Attach BASE FRAME COVER (10) to BASE
FRAME (1) using 3 SCREWS (G) from
above.
E Repeat on other side.
F While holding the deck with both hands,
press the FOOT LATCH (11) with your foot to
lower the deck to the ground.
ASSEMBLY COMPLETE!
Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE
section in the TREADMILL GUIDE.
TREADMILL OPERATION
This section explains how to use your treadmill's console and programming. The BASIC OPERATION section in the
TREADMILL GUIDE has instructions for the following:
• LOCATION OF THE TREADMILL
• USING THE SAFETY KEY
• FOLDING THE TREADMILL
• MOVING THE TREADMILL
• LEVELING THE TREADMILL
• TENSIONING THE RUNNING BELT
• CENTERING THE RUNNING BELT
• USING THE HEART RATE FUNCTION
17
7/31/14 4:34 PM