Velleman CAMIP12N Guide D'installation Rapide page 8

3. Click "LOGIN".
Step 3 - Upgrading the firmware
1. Click the Config button.
2. Click General.
3. Click Maintenance.
You will now add the files you downloaded to the list.
4. Click and select the file AppImg.bin
Repeat this step for the other files:
fboot.bin
kernel.bin
xml.bin
5. Click Upgrade.
Notes
 The system will ask if you want to keep current configurations. It is recommended to keep them. If
not, all configurations will be restored to factory settings after the firmware upgrade.
 It takes a few minutes to finish the upgrade process. Do not disconnect the power during firmware
upgrade, or the upgrade may be failed. The camera will reboot after the upgrade.
9.2 File Backup
You can backup recorder files:
 with the Video Viewer software
 with internet explorer 32 bits
 using the SD card from the camera in the computer.
V. 02 – 01/03/2017
CAMIP12N
8 ©Velleman nv