OLITREM AP 600 Serie Instructions D'utilisation page 8

1. Recycling instructions
1.1- Recycling of packaging
The packaging, protect the cabinet during the carriage. The material used are reused.
Help us to protect the environment and recycling the packaging, contact the municipal services to obtain information's how to proceed.
Be careful with the place storage of packaging material, it must be away from the children, trying to put them in places of recycling.
1.2- Recycling of used equipments
This appliance is labeled in accordance with
European Directive 2012/19/CE concerning used
electrical and electronic appliances (waste electrical
and electronic equipment – WEEA). The guideline
determines the framework for the return and
recycling of
throughout the EU.
The appliance is not without value and must not be treated as an
ordinary domestic waste. Remove them in an environmentally
responsible will recover valuable raw materials.
2. Safety instructions and warning
After having acquires this cabinet, read the recommendations carefully and always keep them within easy reach.
Must keep the instructions in a safe place and accessible to the user, the instructions manual have important information's like the installation,
utilization and maintenance of the equipment. Save all the documentation for utilization or for other person who will adquire the equipment.
2.1- Technical Safety
This cabinet has a litle quantity of refrigerant fluid (R600a or R290) not pollutant, but inflammable.
Must be careful for don't damage the tube where circulate the refrigerant fluid during the carriage or installation. The refrigerant fluid can escape
and cause damage on the eyes.
In case of damage:

Must keep the cabinet away from the flames

Ventilate the cabinet for a few minutes

Disconnect the cabinet

Contact the technical services.
The room where the equipment should be installed must be bigger than the quantity of refrigerant fluid the equipment. In small places and in
occurrence of a leak, can form a mixture of inflammable gas.
For each 8g the refrigerant fluid, the room must be at least 1m3. The quantity of fluid refrigerant is in the characteristic plate of the equipment,
inside the cabinet.
The maintenance operations must be done by the manufacturer, its service agent or similarly qualified persons
in order to avoid hazard.
2.2- Recomendations for use

Before connecting the cabinet, check whether there as been any damage to the cable and plug during transport.

This device belongs to climatic class 3 (indicated in the plate of characteristics) for what the allowable room temperature in which the
device should function will have to be between +16 ºC and +32º C.

Do not touch the cabinet with wet or damp hands or feet.

This device is not foreseen to be used by people (including children) whose physical capacities, sensorial or mental are reduced, or
people with lack of experience or knowledge, except if they will be able to benefit, through a responsible person for its security, of a
monitoring or previous instructions relative to the use of the device.

Never disconnect the cabinet from the power point by pulling the power cable. Use the ribbed area to grip the plug.

Never use electronic device inside this device (warmer...) Danger of explosion.

Never use mechanical devices for accelerate de defrosting, different than recommended by the manufacturer. (e.g. Defrosting or
cleaning the equipment with a steam cleaner! The steam could reach the electric elements and cause short circuit. Danger of electric
shock.

For defrosting and cleaning, must disconnect the cabinet.

Don't use sharps objects for eliminate ice, this action could damage the tube where circulates the cooling fluid. The cooling fluid
could be in fire and cause injuries on the eyes.
04.04.2018
used appliances as applicable
ADVICE!
In equipments out of service must:
-
Disconnect the cabinet.
- Cut the electric cabe and move them away from the equipment
like the power plug.
- The cooling equipments have refrigerant fluid, it must be correctly
eliminate.
Be careful for don't damage the tube where circulate the cooling
fluid, until your recycling.
7