Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Guide d'installation/
Note: The master battery is the battery connected to the inverter.
Step 6 - Power Wiring
the maximum operating current of the inverter is higher than 120A, add
coherent cables.
By block of 4 batteries:
EN
1.
FR
FR
2.
In case of installation of more than 4 batteries:
IM4850DA_guide_installation_v.A.3
Installation guide
4850
Master battery setting
Each pair of power cables is limited to a continuous current of 120A. If
Connect the cable from the + connector of battery N to the +
connector of battery N+1.
Connect the cable from the - connector of battery N to the -
connector of battery N+1.
Slave battery setting
39/ 43
Publicité
Table des Matières
