IMEON ENERGY 4850 Guide D'installation page 27

Guide d'installation/


Warning
1. After opening the package, check the battery and its accessories.
If the product is damaged, or any parts are missing, please
contact your local supplier.
2. Before installation, please make sure that you have turned off
the power supply and that the battery is turned off.
3. The wiring must be done correctly,
4. It is NOT allowed to connect the battery and AC power directly.
5. The battery management system (BMS) is designed for 48V. It
must not be connected in series.
6. The battery system must be properly grounded; the resistance
EN
must be less than 1 Ω.
FR
7. Please make sure that the technical specifications (technical
FR
performance, communication protocol compatibility...) of the
battery match the equipment you want to associate them with.
8. If you need to move the battery, the power must be completely
cut off.
9. It is strictly forbidden to connect the battery to other battery
systems.
10. It is strictly forbidden to connect the battery to a defective or
incompatible inverter.
11. It is strictly forbidden to open, repair or disassemble the battery.
12. In case of fire, please use only a dry powder fire extinguisher.
The supplier is not liable for damage caused by improper
maintenance or failure to follow the instructions in this installation
guide.
IM4850DA_guide_installation_v.A.3
Installation guide
4850
If the battery is stored for a long time, it should be recharged
every 6 months and the SOC (State of Charge) should not be
less than 80%.
If an abnormal event occurs, please contact the supplier.
27/ 43