Blaupunkt BP-GIKLED09 Mode D'emploi page 6

BP-GIKLED09
6. Troubleshooting
7. Care and Maintenance
P-GIKLED09.indd 6
Problem
Appliance does not start
Appliance does not light
Noisy fan
Storage
Store the appliance and its accessories in a clean and dry area.
Cleaning
The cleaning frequency depends on the intensity of use. Check the tray of the
device at least once a week. Clean more often if necessary.
Before starting any cleaning or maintenance activities, unplug the appliance from its
power source and let it cool down.
Wipe all exterior surfaces of the appliance clean with a soft cloth dampened with
a soap and water solution. Do not immerse or submerge any part of the appliance
in water or any other liquid. Never use solvents or cleaning agents containing
petroleum (petrol, kerosene, oil), paint thinner, turpentine, alcohol, or ammonia.
1. Switch off the device and disconnect from the power supply.
2. Press the container button to open and access the container.
3. Slightly turn the funnel to the left and release. Take out the funnel to clean it.
4. Re-assemble by proceeding in reverse order.
Maintenance
All repairs should only be carried out by qualified service personnel. Do not open
exterior casing of the appliance. There are no user-serviceable parts inside. Opening
or visible attempts to open or repair the appliance may void any guarantee and/or
cause damage to the product or personal injury.
Reason
Power supply not
connected well
On-off button not pressed
Power supply not
connected well
Light is damaged
PCB board is damaged
Foreign objects in the fan
6
Possible solution
Reconnect the power
supply
Press the on-off button
Reconnect the power
supply
Light source cannot
be replaced; scrap the
appliance
PCB Board cannot be
replaced; scrap the
appliance
Clean the fan
12/01/2021 15:48:29