Publicité
Les langues disponibles
Les langues disponibles
To manually search for the DCF:
Press and hold the "AL-3 - 4
flashing. The weather station will now to try again to receive the DCF signal again. Each day at
3:00 am the weather station automatically tries to synchronize with the DCF-77 station.
RESET / SYSTEM FAILURE:
In case you've lost the overview of the settings or the weather station is exhibiting a possible
error, it may be wise to reset the weather station and outdoor sensor.
For more information, visit: www.fysic.com
POSITIONING TIPS:
• Never place the weather station in direct sunlight and keep it away from heat radiating
objects (lights, heaters, etc.)
• For a proper reception of the radio controlled time signals, never place the weather station
near large metal surfaces or heavy electrical equipment such as a refrigerator or washing
machine (some experimenting might be required).
• Depending on local circumstances, the effective range between the outdoor sensor and
weather station might vary. Before actually fixing the outdoor sensor, check whether the
connection between the outdoor sensor and weather station remains. If so, mount the
outdoor sensor.
• The distance between the station and the external sensor should be no more than 30 meters.
MOUNTING:
In case of wall-mounting, the indoor and outdoor unit may be suspended from a single screw.
You may fold out the table support to place the weather station and outdoor unit on a flat
surface.
ALARM MODE
MON - FRI
MON - SUN
SPECIFICATIONS:
Weather station:
indoor temperature measurement range:
clock synchronization signal: DCF-77 Frankfurt.
power: battery 4 x 1.5V size AA (LR6) alkaline
dimensions: 245 x 205 x 30 mm
" button for at least 2 seconds until the DCF time icon
AA 1,5V
AA 1,5V
AA 1,5V
AA 1,5V
-10°C ~ +50°C
OPEN
Outdoor sensor:
outdoor temperature measurement range:
power: battery 2 x 1.5V size AAA (LR03) alkaline
transmission frequency: 433MHz
range: ± 30 meter
dimensions: 61 x 101 x 20mm
RESET
-20 ~ +50°C
starts
Publicité
