Publicité
Les langues disponibles
Les langues disponibles
DAILY SNOOZE AND ALARM CLOCK FUNCTION:
The weather station offers 4 alarm clock functions. The alarm clock is activated when the alarm
clock functions with a number appears in the display. The alarm clock function will start flashing
while the snooze function is enabled. Every 5 minutes an alarm signal will sound.
To set the wake-up time:
•
Repeatedly press the "ALARM"(21) button to select the wake-up time. Choose
from wake-up time 1 through 4. Each wake-up time may be set individually.
•
Go to the desired wake-up time (icon 1, 2, 3 or 4 and AL is visible).
•
Press and hold the "ALARM" button for 2 seconds until the wake-up time hours
start flashing. Press the ▲(23) and ▼(16) buttons to set the desired hour.
•
Press the "ALARM" button again; the wake-up time minutes start flashing. Press the ▲(23)
and ▼(16) buttons to set the desired minutes.
•
Press the "ALARM" button again or wait 10 seconds to save your settings.
•
Use the "AL 1-2" (23) button to select the desired wake-up time 1 and 2, use the "AL 3-4"
(16) button to select the desired wake-up time 3 and 4. This wake-up time is active when
the icon appears in the display. All 4 wake-up times or a combination of them may be se-
lected.
Wake-up time repetition:
Use the selection button 19 to set the wake-up time repetition to business
days Monday through Friday (MON - FRI) or to the entire week (MON -
SUN).
To disable the alarm signal:
As soon as an active wake-up time is reached, the weather station will sound an alarm signal.
Press any button (except the "SNOOZE" button) to stop the alarm signal. If no button is
pressed, the alarm signal will stop automatically after ± 2 minutes.
After 24 hours the alarm signal, connected to the set wake-up time, will sound again.
Snooze function:
During an alarm, press the "SNOOZE" (17) button to temporarily stop the alarm signal and
enter the snooze mode; the
signal will sound again after 5 minutes. This may be repeated for up to 7 times.
To cancel the snooze function during snoozing:
While snoozing, press the "ALERT" (20) button to cancel the snooze function.
The
icon disappears.
THERMOMETER:
The temperature is shown at the left side in the display. Provided that the
outdoor sensor is registered, the outdoor temperature is shown at the right
side in the display. See "To manually set the weather station" to have the
temperature display shown in °C or °F.
When the measured temperature is outside the effective measuring range,
the display will show LL.L for values that are too low and HH.H for values that
are too high.
Temperature alert function:
You may only set an alert for the outdoor temperature.
You may set the desired temperature and as soon as the outdoor temperature exceeds the
set temperature an alert will sound. You may also set a lower limit for an alert as soon as the
outdoor temperature falls below the set temperature. Both thresholds can be enabled simultane-
ously.
icon starts flashing. Upon activating the snooze mode, the alarm
ALARM MODE
MON - FRI
MON - SUN
D S T
Publicité
