Publicité
3. According to the desired working position, you can mount the holder
close to the handle (Position 1) or near the locking nut (Position 2).
Below you will find some hints on trimming hedges:
Before cutting bushes, scrubs or hedges, remove thick branches or
similar material. Make sure that there are no small animals hidden
in the bushes or hedges.
There are different cutting techniques and certain seasons to be
observed when trimming hedges or bushes. For detailed infor-
mation see appropriate technical literature.
Please note the local rest periods when working with the hedge
trimmer in order to avoid disturbances.
If a hedge has to be cut back very substantially, trim the hedge in
two passes.
First cut the hedge to the desired height and stretch a
string along the hedge at the desired height. Guide
the blades of the hedge trimmer at an angle of
10 – 15° to the hedge in order to get a straight cut.
Trim the hedge to a trapezoidal shape cutting from
the bottom to the top.
Round the top edges of the hedge.
Finally trim the bottom edges back.
Appropriately dispose of cut materials.
All manuals and user guides at all-guides.com
Operation
Position 1
Position 2
Locking Nut (13)
29
correct
Publicité
