Publicité
All manuals and user guides at all-guides.com
x 4
M
M
Wall
Fig. 11
11. Locate a stud in the wall and make a faint mark on the top of the shelf assembly. This will be
where you attach the Angle Bracket (R). Take the shelf down from the wall and, using a power drill,
attach the Angle Bracket (R) to the storage shelf with two 4x32mm Pan Head Screws (M).
Replace the storage shelf on to the wall and secure the Angle Bracket to the wall with two
4x32mm Pan Head Screws (M). See Figure 11.
558KFDH — 01/09 — Page 8
Publicité
